关注我们
Why is it important for lock cylinder manufacturers to talk about anti-theft lock cylinders?
Release time:
2024-03-22
In general, many consumers are layman for the purchase of smart locks. Buying a lock is not a one-time act, involving installation and after-sales. Understand the characteristics, advantages and possible problems of different sales channels. As long as you dare to start from the front door, most of them are unlocked. According to the survey, as long as the lock can not be unlocked within a minute, 90% of the thieves will give up. Therefore, even the password fingerprint lock, if even the basic anti-theft performance can not be guaranteed, even if the high-tech is absolutely not available.
For the house, the convenient way to rob and steal is to walk through the door, so it is more important to do enough work on the security door. The important thing is the anti-theft lock. In recent years, inLock cylinder manufacturerIn the fierce competition, the quality of the anti-theft lock cylinder produced is getting better and better. Why is the anti-theft lock cylinder so important?
In general, many consumers are layman for the purchase of smart locks. Buying a lock is not a one-time act, involving installation and after-sales. Understand the characteristics, advantages and possible problems of different sales channels. As long as you dare to start from the front door, most of them are unlocked. According to the survey, as long as the lock can not be unlocked within a minute, 90% of the thieves will give up. Therefore, even the password fingerprint lock, if even the basic anti-theft performance can not be guaranteed, even if the high-tech is absolutely not available.
To change the lock cylinder of the security door, the first thing you need is to open the door, because the screws and other hardware are on the inside of the door. If you are locked out and want to change the lock cylinder, it is not called changing the lock cylinder. The technology here has violated the relevant national laws and regulations, so it cannot be taught. It depends on how to change the lock when it is opened. First, a Phillips screwdriver unscrews the screw of the handle panel, one on the top and one on the bottom, and then removes the inner and outer lock core caps on both sides of the key hole. Then remove the positioning screw of the lock cylinder and keep the same height with the lock cylinder on the side of the store and in the middle of the lock tongue. At this time, Kunshan can remove the old one and replace it with a new one by unlocking it. Lock core manufacturers said that with the popularity of smart locks, more and more families began to use fingerprint locks instead of mechanical locks. When choosing, we should not only look at the function, but also the mechanical properties, especially the quality. How should be judged?
1. Materials
The lock cylinder and lock pin should be nickel alloy or stainless steel as much as possible. Improved anti-theft performance. Good accuracy requires good materials to ensure. Imported lock cylinder and some domestic high-standard lock cylinder enterprises use nickel alloy materials.
2. Drill plug
The anti-drilling bolt of the lock cylinder is an important line of defense to prevent damage and opening of the anti-theft lock. In view of the characteristics of the copper material of the lock cylinder shell, if no protective measures are taken, as long as the drill bit is drilled, the lock cylinder will be drilled through immediately, thereby opening the lock cylinder.
3. Key protective measures
Any unprotected access card is extremely irresponsible for user safety.
4. Structure
Try to choose the lock cylinder of mixed structure. It is an important indicator to measure the anti-theft performance of the lock cylinder. The technical limitations of a single structure are difficult to meet the challenges of unlocking technology.
Tag:
Contact Us
Mobile:13906639771Mr. Tang
Mobile:18079018605 Mr. Liu
Fax: 0790-5897055
EMAIL：mslock@126.com
Address: Building 8, Phase I, Small and Micro Incubation, Chengdong Industrial Park, FENYI County, Xinyu City, Jiangxi Province
©2024 Jiangxi Mingsheng Lock Industry Co., Ltd. Copyright This website has supported IPV6